DynaBolt Plus Sleeve Anchors Ramset Indonesia

DynaBolt™ Plus Sleeve Anchors



The DynaBolt™ Plus Sleeve Anchor is a medium duty, torque controlled, expansion anchor, with an integrated pull-down section, designed for medium duty anchoring of timber and steel fixtures to concrete, brick or block. The DynaBolt™ Plus is available in a variety of different head styles and finishes.

SPECIFICATIONS

Material	Carbon Steel, Stainless Steel 316 (A4)
Corrosion Protection	Zinc Plating, Hot Dipped Galvanising
Head Styles	Hex Nut, Hex Bolt, Countersunk/Flat Head, Round Head, Hook, Eye, Tie Wire
Fixing Method	Through Fixture
Setting Method	Torque Controlled
Anchoring Method	Expansion
Thread Diameters	M4.5, M6, M8, M10, M12, M16
Drilled Hole Diameters	6mm, 8mm, 10mm, 12mm, 16mm, 20mm
Anchor Lengths	26mm, 32mm, 34mm, 38mm, 40mm, 41mm, 45mm, 49mm, 55mm, 57mm, 60mm, 62mm, 65mm, 66mm, 70mm, 75mm, 76mm, 80mm, 81mm, 85mm, 92mm, 98mm, 100mm, 103mm, 105mm, 106mm, 110mm, 113mm, 124mm, 125mm, 126mm, 140mm, 157mm
Maximum Fixture Thickness’	3mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 32mm, 35mm, 45mm, 49mm, 50mm, 55mm, 60mm, 65mm, 70mm, 80mm
Indicative Working Loads in 32MPa Concrete*	Max Tensile 2.7kN -16.6kN Max Shear 2.5kN - 15.6kN
Substrates	Concrete, Solid Brick, Solid Block, Hollow Brick, Hollow Block, Hollow Slab

FEATURES & BENEFITS

• The DynaBolt™ Plus patented expansion sleeve closes gaps of up to 5mm, pulling down on the fixture to induce clamp load and provide improved security.
• The DynaBolt™ Plus is a fully assembled through fixture anchor. Therefore, assembly, marking out and re-positioning of fixtures is eliminated making installation fast and easy.
• The choice of multiple head styles makes the DynaBolt™ Plus a versatile anchor for a variety of different applications.

INSTALLATION GUIDE

1.Drill or core a hole to the recommended diameter and depth using the fixture as a template.  Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum. 
2.Insert the DynaBolt™ Plus through the fixture and drive with a hammer until the washer contacts the fixture. 
3.Tighten the DynaBolt™ Plus, allowing the sleeve to twist and pull down the fixture firmly onto the substrate. For optimum performance, a torque wrench should be used.

Nama:

Tn. Akhmadi Heru Widodo

E-mail:

novkarigen@gmail.com

Nomor Telpon:

0858 6846 2560

Nomor Ponsel:

Alamat:

Jln. raya tarumajaya perumahan villa mahkota indah III blok c7 no.24 bekasi
Bekasi (Harapan Indah) 17213, Jawa Barat
Indonesia